Electronics

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.   Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles   General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m   Product export information   HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands                                                               *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.   Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles   General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m   Product export information   HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands                                                               *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ HIPS EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.   EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts are very light-weight and can easily be glued together with a variety of adhesives. Unique features Very limited warping High impact resistance Extremely smooth matte surface finish Light-weight and durable High ESCR resistance Engineered to meet UL 94HB flame retardancy standards Easily to glue with various adhesives HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives General printing guidelines * Nozzle size:≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.04 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 20.0m ± 300m Ø 2.85mm ± 7.5m ± 113m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

PETP 3D Printer Filament Arnite ID 3040 (PETP) 2.85mm 500 gram Black

Read more less

  ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features  FDM/FFF-optimized  Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad  Greatly improved mechanical properties and strength  UV amp; weather resistant  Extremely high printing precision         Printing with remarkable fine detail  Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate (*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information  HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands  vv

Read more less

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features FDM/FFF-optimized Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features FDM/FFF-optimized Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

MAKERBOT MAKERBOT TRUE COLOUR PLA XXL TRUE WHITE 4.5 KG FILAMENT FOR REPLICATOR Z18

Read more less

MAKERBOT MAKERBOT SPECIALTY PLA LARGE GLOW IN THE DARK 0.9 KG FILAMENT

Read more less

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features FDM/FFF-optimized Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

PLA 3D Filament Volcano PLA 2.85mm 4500 gram White

Read more less

PLA 3D Filament Volcano PLA 2.85mm 2300 gram White

Read more less

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features FDM/FFF-optimized Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

Volcano PLA is an industrial grade PLA which is engineered for professional applications that require high printing speeds and improved heat resistance and mechanical properties similar to ABS. Volcano PLA offers the same mechanical and thermal properties-after annealing-as most ABS filaments, but with the biodegradability and ease of printing of PLA.Volcano PLA combines a high heat resistance with high printing speeds and high impact resistance into a PLA-based filament engineered for industrial applications.

Read more less

PLA 3D Filament Volcano PLA 2.85mm 8000 gram Black

Read more less

PLA 3D Filament Volcano PLA 1.75mm 8000 gram White

Read more less

PLA 3D Filament Volcano PLA 2.85mm 4500 gram Black

Read more less

PLA 3D Filament Volcano PLA 1.75mm 4500 gram White

Read more less

PLA 3D Filament Volcano PLA 2.85mm 750 gram Black

Read more less

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

Read more less

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

Read more less

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision o   Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m

Read more less

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

Read more less

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

Read more less

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

Read more less

  Silk Gloss PLA (polylactic acid) is modified with another polymer to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk Gloss PLA exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.   Unique features Good surface quality Shiny silk gloss surface finish without visible layers and fine detail High level of light dispersion and reflection Lowering printing speed and temperature increases the silk gloss effect Easy to 3D print Warp-free printing and improved flowing behaviour Excellent first layer adhesion to several (un)heated print surfaces Compatible with AquaSolve PVA for complex dual extrusion 3D printing Wide variety of vivid and brilliant silk gloss colours    Applications Aesthetics, design, and art  Complex educational projects and models Household articles Visualization aids   General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner Print temp: ± 215 - 230° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m   Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands   Compliance * This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

Read more less

  Silk Gloss PLA (polylactic acid) is modified with another polymer to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk Gloss PLA exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.   Unique features Good surface quality Shiny silk gloss surface finish without visible layers and fine detail High level of light dispersion and reflection Lowering printing speed and temperature increases the silk gloss effect Easy to 3D print Warp-free printing and improved flowing behaviour Excellent first layer adhesion to several (un)heated print surfaces Compatible with AquaSolve PVA for complex dual extrusion 3D printing Wide variety of vivid and brilliant silk gloss colours    Applications Aesthetics, design, and art  Complex educational projects and models Household articles Visualization aids   General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner Print temp: ± 215 - 230° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m   Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands   Compliance * This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

ABS Filament ReForm - rTitan 2.85mm 1000 gram OFF-WHITE 3D Printer Filament

Read more less

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

ABS Filament ReForm - rTitan 2.85mm 1000 gram OFF-BLACK 3D Printer Filament

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable. ReForm rPLA is based on exactly the same unique formulation as our EasyFil PLA range, but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PLA filament with significant less environmental impact.    Unique features 100% upcycled/recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA.  Less environmental impact by quality controlling and re-using extrusion waste streams Sustainable packaging ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools ReForm filament is packaged in recycled carton boxes Biodegradable Compliant to FDA food and drink contact articles Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces   General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.24 g/cc 50 gr coil 1 Kg spool       Ø 1.75mm ± 16.8m ± 335m       Ø 2.85mm ± 6.3m ± 126m         Product export information   HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands                                                               *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number.   *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Glass feel recycled PETG Filament ReForm - rPET 2.85mm 1000 gram Off-White 3D Printer Filament

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Glass feel recycled PETG Filament ReForm - rPET 2.85mm 1000 gram Red 3D Printer Filament

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Glass feel recycled PETG Filament ReForm - rPET 2.85mm 1000 gram OFF-BLACK 3D Printer Filament

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

PLA 3D Filament Volcano PLA 1.75mm 50 gram White

Read more less

EasyFil™ PLA - Glow in the Dark EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable General printing guidelines *  Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 65° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Abrasiveness Please be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature.  In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys. Filament length ρ: 1.24g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 16.8m ± 251m Ø 2.85mm ± 6.3m ± 95m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Glass feel recycled PETG Filament ReForm - rPET 2.85mm 1000 gram Light Green 3D Printer Filament

Read more less

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

Read more less

Glass feel recycled PETG Filament ReForm - rPET 2.85mm 1000 gram Grey 3D Printer Filament

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

StoneFil StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone. This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour. Unique features Easy-to-print 50% gravimetric powdered stone filling o   ±37% heavier than “normal” PLA Matte and rough stone-like finish Unique natural/organic gradient colour linings o   Every print has its unique natural stone gradient colour.  General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.12mm Flow rate: ± 110% Print temp: ± 200 - 240° C Print speed: High / Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Abrasiveness StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments. Filament length ρ: 1.70 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 12.2m ± 122m Ø 2.85mm ± 4.6m ± 46m

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

StoneFil StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone. This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.     Unique features Easy-to-print 50% gravimetric powdered stone filling o   ±37% heavier than “normal” PLA Matte and rough stone-like finish Unique natural/organic gradient colour linings o   Every print has its unique natural stone gradient colour shading     General printing guidelines *   Nozzle size: ≥ 0.4mm Layer height: ≥ 0.12mm Flow rate: ± 110% Print temp: ± 200 - 240° C Print speed: High / Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.     Abrasiveness StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.     Filament length   ρ: 1.70 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 12.2m ± 122m Ø 2.85mm ± 4.6m ± 46m

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

FlexiFil is a rubber-like high-performance and partially bio-based flexible TPC (Thermoplastic Co-Polyester) type of 3D printer filament. FlexiFil has unique flexural strength properties, as 3D printed objects with FlexiFil will have a “flexural memory”, allowing objects to return back to their original position or shape after being bent, dent, or folded. Next to this FlexiFil offers a unique combination of flexibility, long term heat resistance, strength, excellent UV resistance and good resistance to chemicals. Unique features Very flexible filament with “flexural memory” Shore hardness of 45D High impact resistance No deformation or breaks when stressed by bending Strong durable Good resistance to chemicals Excellent UV resistance IEC 60695-11-10 Flammability classification: HB 43% renewable bio-based content General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 220 - 260° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 50-100% Experience level: Intermediate / Expert *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.14 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 18.2m ± 182m Ø 2.85mm ± 6.9m ± 69m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC

Read more less

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

EasyFil™ HIPS EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.   EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts are very light-weight and can easily be glued together with a variety of adhesives. Unique features Very limited warping High impact resistance Extremely smooth matte surface finish Light-weight and durable High ESCR resistance Engineered to meet UL 94HB flame retardancy standards Easily to glue with various adhesives HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives General printing guidelines * Nozzle size:≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.04 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 20.0m ± 300m Ø 2.85mm ± 7.5m ± 113m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature. Unique features Extremely high wood-filling of 40% Real wood feel, look and smell Very easy to print Warp-free printing and no deformation after cooling Great thermal stability and filament flowing behaviour Perfect first- and inter-layer adhesion Can be printed at high printing speeds Create wood-nerve structures By postprocessing the printed object with a piece of fine grit sandpaper By varying with the print/extrusion temperature Biodegradable General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 104% Print temp: ± 210 - 240° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.20 g/cc 50 gr coil 0.5 Kg spool 2.3 Kg spool Ø 1.75mm ± 17.3m ± 173m 797m Ø 2.85mm ± 6.5m ± 65m 300m Nozzle cleaning When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle. Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

ClearScent™ ABS ClearScent ABS is an extremely printer friendly Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene type of 3D printer filament which is transparent in its original form and doesn’t produce any unpleasant odours when being 3D printed. Besides its transparency and odourless processing features ClearScent ABS is nearly warp-free, has an excellent thermal stability and its 3D printing flowing behaviour is fine-tuned for optimal 3D printing results. Unique features Transparent ABS filament 90% light transmittance with 2.2% haze Nearly odourless processing / printing Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several heated print surfaces Good chemical resistance Post-processing with Acetone , TetraHydroFuran (THF) and other Analogous Solvents Engineered to be compliant to FDA food and drink contact articles General printing guidelines *  Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 100° C Fan speed: 0-25% Experience level: Beginner  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.06 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 19.6m ± 196m Ø 2.85mm ± 7.4m ± 74m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

  Atlas Support Atlas Support is the next generation in PVA water-soluble support materials for FFF/FDM 3D printing. Atlas Support is the result of extensive research to PVA improvement which has resulted in an unique formulation where numerous PVA grades have been blended into one superior water soluble support material with improved thermal stability. Atlas Support has good bonding to a wide variety of materials – such as PLA, ABS, PETG, ASA, HIPS, et cetera  – and is much less sensitive to degradation by humidity. Unique features Excellent water solubilityo   Excellent support material for complex dual extrusion prints! Improved thermal stabilityo   Much lesser risk of clogged nozzles caused by deteriorating/crystalizing material in (too) hot nozzle Good bonding to various (thermo)plastics Odourless processing Biodegradable once dissolved in water General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 205° C * Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 0-25% Experience level: Expert  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. *) Do not exceed a printing temperature of 225??à_C, because then PVA crystallizes quickly and it will no longer flow and/or dissolve in water. Printing with PVA materials does require a certain level of 3D printing expertise as PVA cannot stay too long in the hot secondary/support nozzle and needs to flow and by that needs expert tweaking to find the optimal “waiting temperature” for the material not to deteriorate/crystalizing in the hot secondary/support nozzle when not being printed.      Filament length  ρ: 1.22 g/cc 50 gr coil 0.3 Kg spool Ø 1.75mm ± 17.0m ± 102m Ø 2.85mm ± 6.4m ± 39m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

AquaSolve™ PVA AquaSolve is a high-end cold water soluble PVA (PolyVinyl Alcohol ) type of 3D printer filament, which bonds very well to a variety of (thermo)plastics – such as PLA, PETG, ABS, and more  – that print within a similar temperature range. This makes AquaSolve an excellent PVA support material for dual extrusion prints. AquaSolve™ PVA has a limited smell during printing and is non-toxic and biodegradable once dissolved in water. Unique features Excellent (cold) water solubility Great support material for complex dual extrusion prints! Good bonding to various (thermo)plastics Very limited smell during printing Biodegradable once dissolved in water General printing guidelines *  Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 205° C * Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 0-25% Experience level: Expert (*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. (*) Do not exceed a printing temperature of 225??à_C, because then PVA crystallizes quickly and it will no longer flow and/or dissolve in water. Printing with PVA materials does require a certain level of 3D printing expertise as PVA cannot stay too long in the hot secondary/support nozzle and needs to flow and by that needs expert tweaking to find the optimal “waiting temperature” for the material not to deteriorate/crystalizing in the hot secondary/support nozzle when not being printed.      Filament length  ρ: 1.23 g/cc 50 gr coil 0.3 Kg spool Ø 1.75mm ± 16.9m ± 101m Ø 2.85mm ± 6.4m. ± 38m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands (*) RoHS amp; REACH compliance in accordance with: RoHS Directive 2011/65/EC -amp;- REACH Directive 1907/2006/EC

Read more less

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features FDM/FFF-optimized Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

MAKERBOT MAKERBOT TRUE COLOUR PLA XL WARM GRAY 2.27 KG FILAMENT FOR REPLICATOR Z18

Read more less

MAKERBOT MAKERBOT TRUE COLOUR PLA XXL WARM GRAY 4.5 KG FILAMENT FOR REPLICATOR Z18

Read more less

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature. Unique features Extremely high wood-filling of 40% Real wood feel, look and smell Very easy to print Warp-free printing and no deformation after cooling Great thermal stability and filament flowing behaviour Perfect first- and inter-layer adhesion Can be printed at high printing speeds Create wood-nerve structures By postprocessing the printed object with a piece of fine grit sandpaper By varying with the print/extrusion temperature Biodegradable General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 104% Print temp: ± 210 - 240° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.20 g/cc 50 gr coil 0.5 Kg spool 2.3 Kg spool Ø 1.75mm ± 17.3m ± 173m 797m Ø 2.85mm ± 6.5m ± 65m 300m Nozzle cleaning When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle. Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

MAKERBOT MAKERBOT TRUE COLOUR ABS TRUE WHITE 1 KG FILAMENT FOR REPLICATOR 2X

Read more less

StoneFil StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone. This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.     Unique features Easy-to-print 50% gravimetric powdered stone filling o   ±37% heavier than “normal” PLA Matte and rough stone-like finish Unique natural/organic gradient colour linings o   Every print has its unique natural stone gradient colour shading     General printing guidelines *   Nozzle size: ≥ 0.4mm Layer height: ≥ 0.12mm Flow rate: ± 110% Print temp: ± 200 - 240° C Print speed: High / Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.     Abrasiveness StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.     Filament length   ρ: 1.70 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 12.2m ± 122m Ø 2.85mm ± 4.6m ± 46m

Read more less

  Silk Gloss PLA (polylactic acid) is modified with another polymer to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk Gloss PLA exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.   Unique features Good surface quality Shiny silk gloss surface finish without visible layers and fine detail High level of light dispersion and reflection Lowering printing speed and temperature increases the silk gloss effect Easy to 3D print Warp-free printing and improved flowing behaviour Excellent first layer adhesion to several (un)heated print surfaces Compatible with AquaSolve PVA for complex dual extrusion 3D printing Wide variety of vivid and brilliant silk gloss colours    Applications Aesthetics, design, and art  Complex educational projects and models Household articles Visualization aids   General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner Print temp: ± 215 - 230° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m   Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands   Compliance * This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature. Unique features Extremely high wood-filling of 40% Real wood feel, look and smell Very easy to print Warp-free printing and no deformation after cooling Great thermal stability and filament flowing behaviour Perfect first- and inter-layer adhesion Can be printed at high printing speeds Create wood-nerve structures By postprocessing the printed object with a piece of fine grit sandpaper By varying with the print/extrusion temperature Biodegradable General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 104% Print temp: ± 210 - 240° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.20 g/cc 50 gr coil 0.5 Kg spool 2.3 Kg spool Ø 1.75mm ± 17.3m ± 173m 797m Ø 2.85mm ± 6.5m ± 65m 300m Nozzle cleaning When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle. Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

  Silk Gloss PLA (polylactic acid) is modified with another polymer to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk Gloss PLA exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.   Unique features Good surface quality Shiny silk gloss surface finish without visible layers and fine detail High level of light dispersion and reflection Lowering printing speed and temperature increases the silk gloss effect Easy to 3D print Warp-free printing and improved flowing behaviour Excellent first layer adhesion to several (un)heated print surfaces Compatible with AquaSolve PVA for complex dual extrusion 3D printing Wide variety of vivid and brilliant silk gloss colours    Applications Aesthetics, design, and art  Complex educational projects and models Household articles Visualization aids   General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner Print temp: ± 215 - 230° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m   Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands   Compliance * This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

MAKERBOT MAKERBOT TRUE COLOUR PLA XXL TRUE BLACK 4.5 KG FILAMENT FOR REPLICATOR Z18

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

MAKERBOT MAKERBOT TRUE COLOUR PLA XXL COOL GRAY 4.5 KG FILAMENT FOR REPLICATOR Z18

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature. Unique features Extremely high wood-filling of 40% Real wood feel, look and smell Very easy to print Warp-free printing and no deformation after cooling Great thermal stability and filament flowing behaviour Perfect first- and inter-layer adhesion Can be printed at high printing speeds Create wood-nerve structures By postprocessing the printed object with a piece of fine grit sandpaper By varying with the print/extrusion temperature Biodegradable General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 104% Print temp: ± 210 - 240° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.20 g/cc 50 gr coil 0.5 Kg spool 2.3 Kg spool Ø 1.75mm ± 17.3m ± 173m 797m Ø 2.85mm ± 6.5m ± 65m 300m Nozzle cleaning When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle. Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

  EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less