Electronics

MAKERBOT MAKERBOT SPECIALTY PLA SMALL OCEAN BLUE 0.2 KG FILAMENT FOR MINI/REPLICATOR

Read more less

MAKERBOT MAKERBOT TRUE COLOUR PLA SMALL TRUE BLACK 0.2 KG FILAMENT FOR MINI/REPLICATOR

Read more less

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature. Unique features Extremely high wood-filling of 40% Real wood feel, look and smell Very easy to print Warp-free printing and no deformation after cooling Great thermal stability and filament flowing behaviour Perfect first- and inter-layer adhesion Can be printed at high printing speeds Create wood-nerve structures By postprocessing the printed object with a piece of fine grit sandpaper By varying with the print/extrusion temperature Biodegradable General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 104% Print temp: ± 210 - 240° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.20 g/cc 50 gr coil 0.5 Kg spool 2.3 Kg spool Ø 1.75mm ± 17.3m ± 173m 797m Ø 2.85mm ± 6.5m ± 65m 300m Nozzle cleaning When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle. Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

StoneFil StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone. This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.     Unique features Easy-to-print 50% gravimetric powdered stone filling o   ±37% heavier than “normal” PLA Matte and rough stone-like finish Unique natural/organic gradient colour linings o   Every print has its unique natural stone gradient colour shading     General printing guidelines *   Nozzle size: ≥ 0.4mm Layer height: ≥ 0.12mm Flow rate: ± 110% Print temp: ± 200 - 240° C Print speed: High / Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.     Abrasiveness StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.     Filament length   ρ: 1.70 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 12.2m ± 122m Ø 2.85mm ± 4.6m ± 46m

Read more less

  Silk Gloss PLA (polylactic acid) is modified with another polymer to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk Gloss PLA exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.   Unique features Good surface quality Shiny silk gloss surface finish without visible layers and fine detail High level of light dispersion and reflection Lowering printing speed and temperature increases the silk gloss effect Easy to 3D print Warp-free printing and improved flowing behaviour Excellent first layer adhesion to several (un)heated print surfaces Compatible with AquaSolve PVA for complex dual extrusion 3D printing Wide variety of vivid and brilliant silk gloss colours    Applications Aesthetics, design, and art  Complex educational projects and models Household articles Visualization aids   General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner Print temp: ± 215 - 230° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m   Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands   Compliance * This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature. Unique features Extremely high wood-filling of 40% Real wood feel, look and smell Very easy to print Warp-free printing and no deformation after cooling Great thermal stability and filament flowing behaviour Perfect first- and inter-layer adhesion Can be printed at high printing speeds Create wood-nerve structures By postprocessing the printed object with a piece of fine grit sandpaper By varying with the print/extrusion temperature Biodegradable General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 104% Print temp: ± 210 - 240° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.20 g/cc 50 gr coil 0.5 Kg spool 2.3 Kg spool Ø 1.75mm ± 17.3m ± 173m 797m Ø 2.85mm ± 6.5m ± 65m 300m Nozzle cleaning When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle. Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

  Silk Gloss PLA (polylactic acid) is modified with another polymer to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk Gloss PLA exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.   Unique features Good surface quality Shiny silk gloss surface finish without visible layers and fine detail High level of light dispersion and reflection Lowering printing speed and temperature increases the silk gloss effect Easy to 3D print Warp-free printing and improved flowing behaviour Excellent first layer adhesion to several (un)heated print surfaces Compatible with AquaSolve PVA for complex dual extrusion 3D printing Wide variety of vivid and brilliant silk gloss colours    Applications Aesthetics, design, and art  Complex educational projects and models Household articles Visualization aids   General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner Print temp: ± 215 - 230° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m   Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands   Compliance * This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

EasyFil™ HIPS EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.   EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts are very light-weight and can easily be glued together with a variety of adhesives. Unique features Very limited warping High impact resistance Extremely smooth matte surface finish Light-weight and durable High ESCR resistance Engineered to meet UL 94HB flame retardancy standards Easily to glue with various adhesives HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives General printing guidelines * Nozzle size:≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.04 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 20.0m ± 300m Ø 2.85mm ± 7.5m ± 113m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ HIPS EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.   EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts are very light-weight and can easily be glued together with a variety of adhesives. Unique features Very limited warping High impact resistance Extremely smooth matte surface finish Light-weight and durable High ESCR resistance Engineered to meet UL 94HB flame retardancy standards Easily to glue with various adhesives HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives General printing guidelines * Nozzle size:≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.04 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 20.0m ± 300m Ø 2.85mm ± 7.5m ± 113m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features FDM/FFF-optimized Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

Crystal Flex™ Crystal Flex is a high-performance and easy to use Styrene-Butadiene Copolymer based 3D printer filament, which combines strength, resilience, semi-flexibility and transparency with printability. Crystal Flex filament is as clear as PolyCarbonate and has an extremely high surface gloss and by that can truly be called a bright filament. All these properties combined make Crystal Flex a diverse and wonderful filament to print with and which can be applied for a wide range of applications. Unique features Plexiglass-like transparency Very clear filament with 92% light transmittance and extremely high surface gloss Semi-flexible, bendable and resilient Shore hardness of 63D and bendable up to 230% without causing white stress marks Very easy to print Practically no warping due to extremely low water-absorption properties Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several heated print surfaces USP Class VI Engineered to meet UL 94HB flame retardancy standards Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 230 - 260° C Print speed: High Retraction: Yes ± 5mm Heat bed: ± 80 - 100° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.01 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 20.6m ± 206m Ø 2.85mm ± 7.8m ± 78m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Copper 3D - PLActive Copper 3D PLActive is an innovative Nanocomposite 3D printer filament developed with proven high-quality EasyFil PLA compound and a patented, scientifically validated and highly effective Nano-Copper additive. PLActive filament is FDA registered and eliminates more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms. Key features FDA registered filament Compliant to European Union norms: No. 10/2011, No. 1935/2004 and No. 2023/2006 Antibacterial action has been scientifically validated eliminating more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms Clinically tested in prosthesis for amputees with excellent results  Ideal for the manufacture of other medical applications where it’s dangerous to have bacterial contamination, such as postoperative prostheses, wound dressing and surgical equipment Antibacterial properties confirmed by two microbiology laboratories in Chile and USA Manufactured in the Netherlands according to ISO 9001/2015 certified manufacturing standards PLActive has thermoforming characteristics that facilitate post-processing and final adjustments of the 3D printed application Compatible with AquaSolve for complex multi-extrusion 3D printing Very easy to 3D print with all improved printing properties of EasyFil PLA Biodegradable  Applications Medical applications Food contact and processing applications Orthopedics Surgical guides and equipment Water-filtering applications Postoperative prostheses General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.10mm Experience level: Beginner Print temp: ± 190 - 210° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0. 75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: Description Country of origin 39169090 Monofilament the Netherlands Compliance *This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

  Silk Gloss PLA (polylactic acid) is modified with another polymer to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk Gloss PLA exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.   Unique features Good surface quality Shiny silk gloss surface finish without visible layers and fine detail High level of light dispersion and reflection Lowering printing speed and temperature increases the silk gloss effect Easy to 3D print Warp-free printing and improved flowing behaviour Excellent first layer adhesion to several (un)heated print surfaces Compatible with AquaSolve PVA for complex dual extrusion 3D printing Wide variety of vivid and brilliant silk gloss colours    Applications Aesthetics, design, and art  Complex educational projects and models Household articles Visualization aids   General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner Print temp: ± 215 - 230° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m   Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands   Compliance * This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance. Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.  Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Almost odourless processing/printing Biodegradable Available in a variety of semi-translucent colors and opaque black/white General printing guidelines Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 335m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 126m ± 291m ± 569m ± 1011m Product export information HS Code  Description Country of origin 39169090 Monofilament Netherlands  Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

Copper 3D - PLActive Copper 3D PLActive is an innovative Nanocomposite 3D printer filament developed with proven high-quality EasyFil PLA compound and a patented, scientifically validated and highly effective Nano-Copper additive. PLActive filament is FDA registered and eliminates more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms. Key features FDA registered filament Compliant to European Union norms: No. 10/2011, No. 1935/2004 and No. 2023/2006 Antibacterial action has been scientifically validated eliminating more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms Clinically tested in prosthesis for amputees with excellent results  Ideal for the manufacture of other medical applications where it’s dangerous to have bacterial contamination, such as postoperative prostheses, wound dressing and surgical equipment Antibacterial properties confirmed by two microbiology laboratories in Chile and USA Manufactured in the Netherlands according to ISO 9001/2015 certified manufacturing standards PLActive has thermoforming characteristics that facilitate post-processing and final adjustments of the 3D printed application Compatible with AquaSolve for complex multi-extrusion 3D printing Very easy to 3D print with all improved printing properties of EasyFil PLA Biodegradable  Applications Medical applications Food contact and processing applications Orthopedics Surgical guides and equipment Water-filtering applications Postoperative prostheses General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.10mm Experience level: Beginner Print temp: ± 190 - 210° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0. 75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: Description Country of origin 39169090 Monofilament the Netherlands Compliance *This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

FlexiFil is a rubber-like high-performance and partially bio-based flexible TPC (Thermoplastic Co-Polyester) type of 3D printer filament. FlexiFil has unique flexural strength properties, as 3D printed objects with FlexiFil will have a “flexural memory”, allowing objects to return back to their original position or shape after being bent, dent, or folded. Next to this FlexiFil offers a unique combination of flexibility, long term heat resistance, strength, excellent UV resistance and good resistance to chemicals. Unique features Very flexible filament with “flexural memory” Shore hardness of 45D High impact resistance No deformation or breaks when stressed by bending Strong durable Good resistance to chemicals Excellent UV resistance IEC 60695-11-10 Flammability classification: HB 43% renewable bio-based content General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 220 - 260° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 50-100% Experience level: Intermediate / Expert *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.14 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 18.2m ± 182m Ø 2.85mm ± 6.9m ± 69m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC

Read more less

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Logitech MK550 Wireless Desktop Keyboard Mouse Combo 3 Yrs battery life comfortable palm rest & adjustable tilt legs Laser-grade tracking side-to-side SPECS & DETAILS DIMENSIONS Keyboard Height x Width x Depth: 24 mm x 457.3 mm x 193.5 mm Weight: 805 g (w/o batteries) Mouse Height x Width x Depth: 41 mm x 65 mm x 120 mm Weight: 83g (w/o batteries, w/o receiver) SYSTEM REQUIREMENTS Compatible with: Windows 10 or later, Windows 8, Windows 7, Chrome OSTECHNICAL SPECIFICATIONS MK545 ADVANCED Wireless Keyboard K545: 2 x AA alkaline batteries (pre-installed) Wireless Mouse M510: 2 x AA alkaline batteries (pre-installed) Battery weight: 24g / battery Keyboard 36-month keyboard battery life Familiar key shape and feel, whisper-quiet 3 tilt positions (natural, 4°, and 8°) Spill resistant design Abrasion resistant key print Advanced 2.4GHz wireless (10 meters) Wireless encryption Tiny USB receiver with Logitech UnifyingTechnology On/off power switch Caps lock indicator light Battery indicator light Mouse 24-month mouse battery life Contoured shape with soft rubber grips Full-size and ambidextrous shape Laser-grade tracking 7 buttons, scroll wheel On/off power switch Battery indicator light PACKAGE CONTENTS Wireless Keyboard K545 Wireless Mouse M510 Logitech Unifyingreceiver 4 AA alkaline batteries (pre-installed) User documentation WARRANTY INFORMATION 1-Year Limited Hardware Warranty PART NUMBER PN: 920-008696

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Technical Specifications Dual connectivity Connect via the included USB receiver or Bluetooth low energy technology Easy-switch keys to connect up to three devices and easily switch between them 10 meters wireless range Hand proximity sensors that turn the backlighting on Ambient light sensors that adjust backlighting brightness USB-C rechargeable. Full charge lasts 10 days “ or 5 months with backlighting off On/Off power switch Caps Lock and Battery indicator lights Compatible with Logitech Flow enabled mouse Dimensions MX Keys Keyboard Height: 131.63 mm Width: 430.2 mm Depth: 20.5 mm Weight: 810 g USB Receiver Height: 18.4 mm Width: 14.4 mm Depth: 6.6 mm Palm rest Height: 64 mm Width: 420 mm Depth: 8 mm System Requirements Requirements Internet connection for software download Logitech Options software on macOS USB port or Bluetooth low energy enabled device with keyboard support USB Receiver Windows 7 or later macOS 10.11 or later Linux Android 6 or later Bluetooth Windows 8 or later macOS 10.12 or later Linux iOS 9 or later Android 6 or later Package Contents Keyboard Unifying receiver USB-C charging cable (USB-A to USB-C) User documentation Warranty Information 1-Year Limited Hardware Warranty

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

HDglass™ HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament.    HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Unique features Extremely transparent and high gloss 90% optical light transmittance with only 1% of haze Easy to print Nearly warp-free and perfect inter-layer adhesion Good first layer adhesion to a heated glass print bed and many other surfaces Compatible for printing at high speed Odourless processing/printing High strength and toughness compared to similar materials Watertight printing Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 110% Print temp: ± 195 - 225° C Print speed: High Retraction: Yes - 6mm Heat bed: ± 65 - 75° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. HDglass color terminology HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments. Transparent / Clear Translucent colored Slightly translucent colored Opaque Clear See Through Stained Blinded Filament length ρ: 1.27 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.4m ± 246m ± 753m ± 1473m ± 2619m Ø 2.85mm ± 6.2m ± 93m ± 284m ± 555m ± 987m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

FlexiFil is a rubber-like high-performance and partially bio-based flexible TPC (Thermoplastic Co-Polyester) type of 3D printer filament. FlexiFil has unique flexural strength properties, as 3D printed objects with FlexiFil will have a “flexural memory”, allowing objects to return back to their original position or shape after being bent, dent, or folded. Next to this FlexiFil offers a unique combination of flexibility, long term heat resistance, strength, excellent UV resistance and good resistance to chemicals. Unique features Very flexible filament with “flexural memory” Shore hardness of 45D High impact resistance No deformation or breaks when stressed by bending Strong durable Good resistance to chemicals Excellent UV resistance IEC 60695-11-10 Flammability classification: HB 43% renewable bio-based content General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 220 - 260° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 50-100% Experience level: Intermediate / Expert *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.14 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 18.2m ± 182m Ø 2.85mm ± 6.9m ± 69m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC

Read more less

FlexiFil is a rubber-like high-performance and partially bio-based flexible TPC (Thermoplastic Co-Polyester) type of 3D printer filament. FlexiFil has unique flexural strength properties, as 3D printed objects with FlexiFil will have a “flexural memory”, allowing objects to return back to their original position or shape after being bent, dent, or folded. Next to this FlexiFil offers a unique combination of flexibility, long term heat resistance, strength, excellent UV resistance and good resistance to chemicals. Unique features Very flexible filament with “flexural memory” Shore hardness of 45D High impact resistance No deformation or breaks when stressed by bending Strong durable Good resistance to chemicals Excellent UV resistance IEC 60695-11-10 Flammability classification: HB 43% renewable bio-based content General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 220 - 260° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 50-100% Experience level: Intermediate / Expert *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.14 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 18.2m ± 182m Ø 2.85mm ± 6.9m ± 69m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC

Read more less

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature. Unique features Extremely high wood-filling of 40% Real wood feel, look and smell Very easy to print Warp-free printing and no deformation after cooling Great thermal stability and filament flowing behaviour Perfect first- and inter-layer adhesion Can be printed at high printing speeds Create wood-nerve structures By postprocessing the printed object with a piece of fine grit sandpaper By varying with the print/extrusion temperature Biodegradable General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 104% Print temp: ± 210 - 240° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.20 g/cc 50 gr coil 0.5 Kg spool 2.3 Kg spool Ø 1.75mm ± 17.3m ± 173m 797m Ø 2.85mm ± 6.5m ± 65m 300m Nozzle cleaning When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle. Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

A high print quality 44inch large format device aimed at print service providers.

Read more less

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature. Unique features Extremely high wood-filling of 40% Real wood feel, look and smell Very easy to print Warp-free printing and no deformation after cooling Great thermal stability and filament flowing behaviour Perfect first- and inter-layer adhesion Can be printed at high printing speeds Create wood-nerve structures By postprocessing the printed object with a piece of fine grit sandpaper By varying with the print/extrusion temperature Biodegradable General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 104% Print temp: ± 210 - 240° C Print speed: Low Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.20 g/cc 50 gr coil 0.5 Kg spool 2.3 Kg spool Ø 1.75mm ± 17.3m ± 173m 797m Ø 2.85mm ± 6.5m ± 65m 300m Nozzle cleaning When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle. Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Read more less

Canon imagePROGRAF TA-30 Quiet compact and versatile multi-purpose printer. Minimise media and ink costs with versatile borderless printing Advanced multi-sensor technology ensures highly accurate borderless printing on any roll size – even when the roll width and print size don’t match. Ink costs are also optimised with a 55ml ink tank for stunning quality at lower print volume. Save space. Small and light the compact design fits flush against the wall with full front accessibility. Boost productivity. Maintain speed and reduce costs with continuous printing even during ink tank replacement. Precision print. Innovative Air Feeding System keeps paper flat for high quality printing on a variety of media.

Read more less

CANON EXCHANGE ROLLER KIT FOR CANON DRM160 M160II DRC240

Read more less

CANON DRM140 Document Scanner

Read more less

EasyFil™ HIPS EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.   EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts are very light-weight and can easily be glued together with a variety of adhesives. Unique features Very limited warping High impact resistance Extremely smooth matte surface finish Light-weight and durable High ESCR resistance Engineered to meet UL 94HB flame retardancy standards Easily to glue with various adhesives HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives General printing guidelines * Nozzle size:≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.04 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 20.0m ± 300m Ø 2.85mm ± 7.5m ± 113m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

EasyFil™ HIPS EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.  EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts are very light-weight and can easily be glued together with a variety of adhesives. Unique features Very limited warping High impact resistance Extremely smooth matte surface finish Light-weight and durable High ESCR resistance Engineered to meet UL 94HB flame retardancy standards Easily to glue with various adhesives HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives General printing guidelines *  Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.04 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 20.0m ± 300m Ø 2.85mm ± 7.5m ± 113m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

CANON FEED ROLLER FOR CANON P150

Read more less

EasyFil™ HIPS EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.   EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts are very light-weight and can easily be glued together with a variety of adhesives. Unique features Very limited warping High impact resistance Extremely smooth matte surface finish Light-weight and durable High ESCR resistance Engineered to meet UL 94HB flame retardancy standards Easily to glue with various adhesives HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives General printing guidelines * Nozzle size:≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.04 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 20.0m ± 300m Ø 2.85mm ± 7.5m ± 113m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

CANON IMAGEPROGRAF PRO-1000. MANUFACTURER CODE: PRO1000. COMPATIBLE PRINTERS (IF ANY) :0 PAGES YIELD (IF ANY): 0

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlandsv

Read more less

The Canon imagePROGRAF TM-200 MFP L24ei is a wide format printer and scanner that enhances productivity for small fast paced offices. With speed and economy this compact multifunction printer produces professional quality posters CAD drawings and GIS files.Build your business with this affordable yet productive multifunction printer.Present CAD and GIS files in high definition with true colour and sharp lines with your affordable multifunction printer. Fast efficient and easy to use with a built in scanner the small size of your imagePROGRAF TM-200 MFP L24ei means it will slot into the tightest space. And with sound dampening technology you&8217;ll barely notice it get to work.Quick quiet and incredibly versatileSmart dampening technology reduces production noise by 60 so your imagePROGRAF can create its finest work even in the quietest office environmentInspiring quality at the highest speedExceed deadlines and expectations with CAD and GIS files reproduced in amazing quality and large format with durable pigment based inks on plain paper

Read more less

Premium quality Form Futura (made in Netherlands) 3D Fillament professional 3D Printing.

Read more less

Formfutura MetalFil Classic Copper is a composite PLA (polylactic acid) filament that is gravimetrically filled with approximately 80% copper powder. The high copper content in MetalFil Classic Copper makes 3D printed objects nearly indistinguishable from genuine copper casted objects. MetalFil Classic Copper can be post-processed with various patina effects. Unique features Very high copper-filling of 80% Real copper look, heavyweight, and “cold” copper metal feel Approximately 300% heavier than PLA (density of 3.4 g/cc)Compatible with full metal, PEEK, and PFTE hotends Compatible with direct drive and Bowden style extruders Compatible with ≥ 0.4mm hardened nozzles with retraction settings enabled Easy to post-process MetalFil can be brushed, sanded, polished, waxed, coated and patina post-processed Applications Aesthetics, design, and art Figurines and miniatures General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Experience level: Beginner Print temp: ± 215 - 235° C * Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. *) If blobs/lumps form around the nozzle then your print temperature is too high. Post processing MetalFil - Classic Copper Brushing and/or sand grinding - Once printed MetalFil - Classic Copper objects can very easily be brushed with a brass brush or sanded with fine-grit sandpaper. By brushing and/or sand grinding your printed object you will brush/shine up the high concentration of copper powders. Build-in white polish feature - After being brushed and/or sanded MetalFil - Classic Copper will reveal its white polish feature. A very thin white layer/haze on your object will now allow you to easily polish your 3D print into a beautiful copper object. Professional polishing with a rotary tumbler - Post-processing a MetalFil - Classic Copper 3D printed object with a rotary tumbler will make your FDM 3D printed object indistinguishable from genuine copper casted objects. Patina post-processing - You can create several patina effects on MetalFil - Classic Copper printed objects in just one day time. With an ammonia and soda treatment you can for instance easily create a beautiful ancient green/blue weathering effect on your copper object. Waxing and coating - After every above-mentioned post-processing measure, you can always wax or coat your printed object to get an incredible shine effect. Waxing can be done with products such as beeswax and for coating one can think about products such as XTC-3D. Abrasiveness - Please be aware that MetalFil filaments contain a very high concentration of metal powders, which have an abrasive nature. In general, these metal powders will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend using nozzles from stainless steel or other hardened alloys. Filament length ρ: 3.4 g/cc 50 gr coil 0.75 Kg spool 1.5 Kg spool Ø 1.75mm ± 6.1m ± 92m ± 183m Ø 2.85mm ± 2.3m ± 35m ± 69m Nozzle cleaning When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle. Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less

The imagePROGRAF TM-300 is 60 quieter and can unobtrusively fit into any working environment. Even on plain paper the full pigment Lucia TD ink system produces exceptional print quality and continuous printing boosts output productivity.

Read more less

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

Achieve professional large format print quickly easily and cost effectively Whether you’re looking to reproduce fine drawings or print visual concepts in brilliant colour Canon’s large format imagePROGRAF TM-300 is your ideal solution. Compact cost effective and quiet this user friendly large format printer and scanner uses pigment based inks to produce long lasting professional quality images. High output without the fussWorried about office distractions Don’t be. Your Canon imagePROGRAF is 60 quieter than the competition yet 20 faster when it comes to output. Fast high quality inkjet printingAchieve new levels of productivity with this fast moving inkjet printer that uses pigment based ink for long lasting colour and detail on plain paper.

Read more less

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Read more less

CANON PRO300 PRO INKJET. MANUFACTURER CODE: PRO-300. COMPATIBLE PRINTERS (IF ANY) : PAGES YIELD (IF ANY):

Read more less

CANON P215 MKII SCANNER. MANUFACTURER CODE: P-215II. COMPATIBLE PRINTERS (IF ANY) :0 PAGES YIELD (IF ANY): 0

Read more less

CANON SELPHY QX10 GREEN. MANUFACTURER CODE: QX10GR. COMPATIBLE PRINTERS (IF ANY) : PAGES YIELD (IF ANY):

Read more less

CANON P208II SCANNER. MANUFACTURER CODE: P-208II. COMPATIBLE PRINTERS (IF ANY) :0 PAGES YIELD (IF ANY): 0

Read more less

CANON DRC225WII SCANNER. MANUFACTURER CODE: DR-C225WII. COMPATIBLE PRINTERS (IF ANY) : PAGES YIELD (IF ANY):

Read more less

CANON SELPHY QX10 WHITE. MANUFACTURER CODE: QX10WH. COMPATIBLE PRINTERS (IF ANY) : PAGES YIELD (IF ANY):

Read more less

CANON SELPHY QX10 BLACK. MANUFACTURER CODE: QX10BK. COMPATIBLE PRINTERS (IF ANY) : PAGES YIELD (IF ANY):

Read more less

CANON SELPHY QX10 PINK. MANUFACTURER CODE: QX10PK. COMPATIBLE PRINTERS (IF ANY) : PAGES YIELD (IF ANY):

Read more less

CANON Selphy CP1300W Mini Photo Printer

Read more less

CANON Selphy CP1300B Mini Photo Printer

Read more less

CANON PIXMA HOME TS5160BLACK. MANUFACTURER CODE: TS5160BK. COMPATIBLE PRINTERS (IF ANY) : PAGES YIELD (IF ANY):

Read more less

iPF TA-20 24'' 5 Colour Graphics Large Format Printer with LFP Roll, bundle inclusion is main unit and 90 gsm matt paper roll for installation

Read more less

The essential fi Series scanner with exceptional business performance 40 ppm / 80 ipm scanning in color grayscale and monochrome 80-sheets Automatic Document Feeder ADF Advanced paper handling technology for the ultimate in feeding reliability LED light-source Scanner Central Admin suite Embossed card scanning 1.4 mm thickness Comes with PaperStream IP TWAIN/ISIS and PaperStream Capture  

Read more less

CANON TR150 MOBILE PRINTER. MANUFACTURER CODE: TR150. COMPATIBLE PRINTERS (IF ANY) : PAGES YIELD (IF ANY):

Read more less

The FUJIFILM Business Innovation DocuPrint M285z is the perfect solution for small and medium business workgroups who require high quality fast and efficient monochrome printing with flexible connectivity capabilities in a compact size

Read more less

CANON PIXMA HOME MG2560. MANUFACTURER CODE: MG2560. COMPATIBLE PRINTERS (IF ANY) : PAGES YIELD (IF ANY):

Read more less

The essential fi Series scanner with exceptional business performance 40 ppm / 80 ipm scanning in color grayscale and monochrome 80-sheets Automatic Document Feeder ADF Advanced paper handling technology for the ultimate in feeding reliability LED light-source Built-in flatbed 216 mm x 297 mm or 8.5 in x 11.69 in. Scanner Central Admin suite Embossed card scanning 1.4 mm thickness Comes with PaperStream IP TWAIN/ISIS and PaperStream Capture

Read more less

Achieve great quality prints, copies and scans with the Canon PIXMA G3600 MFP. Featuring pigment inks that are easily refillable via integrated ink tanks and is capable of printing up to 6000 mono or 7000 colour pages on a full tank

Read more less

A6 Scanning desgined for portability and compact spacesDesigned with careful consideration of superior paper handling advanced scanning features and ease of integration these workgroup flatbed scanners fit the bill in front-office and distributed scanning applications.

Read more less

The FI-7030 scans A4 portraits at 27 ppm/54 ipm (200/300 dpi), loads up to 50 sheets at a time, and ensures efficiency with quick startup times and a small footprint.

Read more less

Copper 3D - PLActive Copper 3D PLActive is an innovative Nanocomposite 3D printer filament developed with proven high-quality EasyFil PLA compound and a patented, scientifically validated and highly effective Nano-Copper additive. PLActive filament is FDA registered and eliminates more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms. Key features FDA registered filament Compliant to European Union norms: No. 10/2011, No. 1935/2004 and No. 2023/2006 Antibacterial action has been scientifically validated eliminating more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms Clinically tested in prosthesis for amputees with excellent results  Ideal for the manufacture of other medical applications where it’s dangerous to have bacterial contamination, such as postoperative prostheses, wound dressing and surgical equipment Antibacterial properties confirmed by two microbiology laboratories in Chile and USA Manufactured in the Netherlands according to ISO 9001/2015 certified manufacturing standards PLActive has thermoforming characteristics that facilitate post-processing and final adjustments of the 3D printed application Compatible with AquaSolve for complex multi-extrusion 3D printing Very easy to 3D print with all improved printing properties of EasyFil PLA Biodegradable  Applications Medical applications Food contact and processing applications Orthopedics Surgical guides and equipment Water-filtering applications Postoperative prostheses General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.10mm Experience level: Beginner Print temp: ± 190 - 210° C Fan speed: 50-100%   Heat bed: ± 0 - 60° C Enclosure needed: No   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0. 75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: Description Country of origin 39169090 Monofilament the Netherlands Compliance *This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Read more less